Page 9 - ZSi-Foster-Engineering-Catalog-2019
P. 9
FHS CCP
Flange Clip Side Mount with Conduit “Push In” Clip
Conduit and Cable Support Standard Finish: Silva-Guard (SG)
• Supports conduit from beam flanges.
• Flange thickness range stamped on part. • Only a hammer required for installation. • Material: Spring Steel
• Finish: Silva-Guard
Part No.
Min. - Max. Flange Thickness
Conduit Size
FHS24CCP8
1⁄8" - 1⁄4" (3mm - 6mm)
1⁄2" EMT
FHS58CCP8
5⁄16" - 1⁄2" (8mm - 13mm)
FHS912CCP8
9⁄16" - 3⁄4" (14mm - 19mm)
FHS24CCP12
1⁄8" - 1⁄4" (3mm - 6mm)
31
⁄4" EMT, ⁄2" Rigid
FHS58CCP12
5⁄16" - 1⁄2" (8mm - 13mm)
FHS912CCP12
9⁄16" - 3⁄4" (14mm - 19mm)
FHS24CCP16
1⁄8" - 1⁄4" (3mm - 6mm)
3
1" EMT, ⁄4" Rigid
FHS58CCP16
5⁄16" - 1⁄2" (8mm - 13mm)
FHS912CCP16
9⁄16" - 3⁄4" (14mm - 19mm)
15 lbs.
FHV CC
Flange Hanger with Conduit Clip
• •
•
• •
Supports pipe and conduit from bar joist's and "C" purlin's.
Compatible with many industry standard installation tools.
1⁄16"-1⁄4" flange thickness range. Material: Spring Steel
Finish: Silva-Guard
Part No.
Min. - Max. Flange Thickness
Conduit Size
FHV3CC812
1⁄16" - 1⁄4"
1⁄2" & 3⁄4" EMT, Rigid
FHV3CC16
1⁄16" - 1⁄4"
1" EMT, Rigid
30 lbs.
CFC
Conduit Clip to Flange
Foster
ZSi
Part No.
Flange Thickness
Cable O.D.
CFC2D
1⁄16" - 3⁄16"
0.46 - 0.56
CFC4D
3⁄16" - 9⁄32"
0.46 - 0.56
CFC4E
0.50 - 0.72
CFC8D
5⁄16" - 1⁄2"
0.46 - 0.56
CFC8E
0.50 - 0.72
• Supports flexible conduit and cable from flanges. • Simple Push-in clip design.
• Material: Steel
• Finish: Electro-Galvanized
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Spring Steel Catalog
– 9 –