Page 9 - ZF-Snap-A-Saddle-Pro-Catalog
P. 9

 FLOOR ADAPTER
D
Typical Pipe Line
Snap-A-Saddle Pro Multi Saddle
Snap-A-Saddle Pro MultiTM - Adapters Adaptable Insulated Pipe Saddle
                H-BEAM/I-BEAM ADAPTER
10.42" (265mm) 8.5" (216mm)
4.25"
(108mm)
Ø 0.28" (7mm) Thru
Typical Pipe Line
Snap-A-Saddle Pro Multi Saddle
Stabilizer
           3"
(76mm)
Mount to attach stabilizer to Saddle not shown.
  Stabilizer is attached to Saddle with Strut Mount, Steel Angle, H & I-Beam and Clevis Mount adapters.
   2.10" (53mm) B
E The use of this Stabilizer Adapter with 10" SASM1050G and 12" SASM1250G Saddles is
suggested for additional support.
   Part Number
 B
 D
 E
 Compatible Only with Saddle
 Weight Each (Lbs)
 Box Quantity
  SASMSTAB1050G
  10.34" (263mm)
  R5.13
  2.24" (57mm)
  SASM1050G
  0.20 (0.09kg)
 72
 SASMSTAB1250G
 11.38" (289mm)
 R6.13
 2.28" (58mm)
 SASM1250G
 0.22 (0.10kg)
                            Floor Mount works with 10" SASM1050G and 12" SASM1250G Saddles Requires the Stabilizer and Clevis Mount Adapters as shown in photo to the right.
Stabilizer Floor Mount
Clevis Mount Adapter (19mm) is used to attach Floor Mount
Foster
ZSi
     0.75"
& Stabilizer to Saddle.
    Part Number
 Compatible Only with Saddle
 Requires a Stabilizer
 Requires a Clevis Mount
 Weight Each (Lbs)
 Box Quantity
 SASMFLOOR10-12G
  SASM1050G & SASM1250G
  SASMSTAB1050G & SASMSTAB1250G
  SASMCLEVISG
  0.15 (0.07kg)
  180
   WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  Snap-A-Saddle Pro
– 9 –
 




































   7   8   9   10   11