Page 364 - ZF-Catalog-ZSi-Foster-08-19-R3

Features:
• Steel body (1⁄4" and 3⁄8"),
Aluminum body (1⁄2")
• High flow capacity, low pressure drop
• More sizes for simplified plumbing
• Plastic encapsulation (non-marring Series)
• Seals: Buna N
Swivel Fittings
Foster Swivel Fittings improve maneuverability and ergonomics when using air tools and spray guns. Functioning like a universal joint, swivel fittings allow the hose to remain vertical at all times, which reduces operator fatigue, repetitive motion trauma, and fitting chafe. The non-marring series (plastic encapsulated) is ideal for applications where non-marring and scratch reduction is needed.
Benefits:
• Swivels 360 degrees in two independent planes
• Allows air hose to hang straight down when used with air tools
• Reduces operator fatigue
• Reduces the possibility of carpal tunnel syndrome • Increases air hose life.
Materials of Construction:
• Body: Brass, plated steel or aluminum with plastic covering
Part No.
FPT x MPT
Max. Working Pressure
Desc.
Part No.
FPT x MPT
Max. Working Pressure
Desc.
25US90 25US90-101
1⁄4" x 1⁄4"
300 psig
Brass
Brass, w/Viton Seal
190040
190041
190042
3⁄8" x 1⁄4"
3⁄8" x 3⁄8"
1⁄2" x 1⁄2"
150 psig
Steel/ Aluminum with Plastic Covering
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
Part No.
FPT x MPT
Max. Working Pressure
Desc.
25US 1⁄4" x 1⁄4"
38US 3⁄8" x 3⁄8"
50US 1⁄2" x 1⁄2"
300 psig
Brass/Steel
190026A 1⁄4" x 1⁄4"
190029A 3⁄8" x 1⁄4"
190027A 3⁄8" x 3⁄8"
190028 1⁄2" x 1⁄2"
Part No.
FPT x MPT
Max. Working Pressure
Desc.
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
1⁄4" x 1⁄4"
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
Without Plastic Covering
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
150 psig
Steel/ Aluminum
Part No.
FPT x MPT
Max. Working Pressure
Desc.
25US36
300 psig
Brass/Steel
Part No.
FPT x MPT
Max. Working Pressure
Desc.
190010A 3⁄8" x 1⁄4" 190011A 3⁄8" x 3⁄8" 190012 1⁄2" x 1⁄2"
150 psig
Steel/ Aluminum with Plastic Covering
When used with percussion tools, a minimum of 18" of hose between tool and swivel is required.
Brand - Designates
=Foster or
=Breco Part
– 364 –
www.zsi-foster.com
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Non-Marring Brass / Steel Dual Male to Female Pipe 90° Swivel Dual Swivel Swivel
Standard Swivel Non-Marring Swivel