Page 222 - ZF-Catalog-ZSi-Foster-08-19-R3

W7000
Spot Concrete Insert
W7024 to W7029
Spot Concrete Insert Nuts
Standard Finish: Electro Galvanized
Standard Finish: Electro Galvanized
W7024
W7025
W7026 W7027 W7028
35⁄8"
2"
Insert Nut W7024 - W7029
51mm
A
11⁄4"
Thickness
Concrete Inserts
92mm
12 Ga. Knockout
23 Ga. Tabs
Designed to be used with spot concrete insert nuts W7024 - W7029
A 7⁄8" x 1-5⁄8" knock-out is removed after concrete pour. The spot concrete insert nut is placed in the slot, and then the rod is screwed into the nut. The nut is secured in place by turning the rod. Lateral adjustment is made by loosening the nut and relocating. When selecting rod size, refer to "Load Ratings" of Thread Hanger Rods" chart on page 84.
W7000 800 (3.56 kN)
Safety Factor: 5 based on adequate concrete
11⁄4"
15⁄8"
32mm
41mm
32mm
Part No.
Thickness
Tapped “A” Size
1⁄4"
3⁄8"
Specify 3⁄8" or 1⁄2" Standard is 1⁄2"
1⁄4"-20
3⁄8"-16
1⁄2"-13 5⁄8"-11 3⁄4"-10
Part No.
Allowable Load Lbs. (kN)
Continuous Concrete Insert Part Number Selection Chart
For All Inserts on Pages 223 thru 226
Continuous Concrete Insert Part Number Descriptions
Base Profile Part Number
Add Option Code
Description of Options
Add Finish Code
Completed Part Number
W7270
W7270
W7270
W7270
W7270
W7270
W7270
W7270
W7270
N Insert Only
C Insert and End Caps Only
F Insert, Tape, and Foam Only
FC Insert, Tape, Foam and End Caps
E Insert, Tape, and Ethafoam Only
EC Insert, Tape, Ethafoam, and End Caps
W Insert and Welded Strip Only
WC Insert, Welded Strip, and End Caps **
WCC Insert, Welded Strip, Closure Strip, and End Caps **
PG
PG
PG
PG
PG
PG
PG
PG
PG
W7270NPG
W7270CPG
W7270FPG
W7270FCPG
W7270EPG
W7270ECPG
W7270WPG
W7270WCPG
W7270WCCPG
www.zsi-foster.com
** Note: When using welded strip, plastic end caps will be used.
– 222 –
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.