Page 145 - ZF-Catalog-ZSi-Foster-08-19-R3

• Easy Measuring – Marked in 1⁄ " increments for fast measuring
4
and cutting, while eliminating waste.
• Lock-lip edges ensure that Cush-A-Strip will remain in place with a balanced grip.
• Clamps ordered separately. They are available with a standard bolt and nylon lock nut in steel (electro-dichromate), and
stainless steel, in sizes ranging from 1⁄ " tube to 6" pipe.
Cush-A-StripTM
Cush-A-StripTM
• Manufactured from a thermoplastic elastomer, Cush-A-Strip is designed for use from -50°F to 275°F.
• Easy Stocking – Packaged in 20 foot rolls in an E-Z dispenser box for convenience in handling and storage. Cush-A-Strip roll part number is S-716
Cush-A-StripTM Cutting Guide
Clamp Part No.
Dimensions (Inches)
Gold Plated Steel
Stainless Steel Type 304
Clamp Size O.D.
Tube Size O.D.
Pipe Size (Nom.)
Cutting Schedule
4
(1) Cut appropriate length strip using the cutting schedule shown on right.
(2) Place the pipe on the Cush-A-Strip
(3) Insert the clamps in the strut
(4) Tighten the clamps.
Varies up to 0.23" 6mm
TG008C NS008
TG010C NS010
TG012C NS012
TG014C NS014
TG016C NS016
TG018C NS018
TG020C NS020
TG022C NS022
TG024C NS024
TG024C NS024
TG026C NS026
NG028C CS028
NG030C CS030
NG032C CS032
NG034C CS034
NG036C CS036
NG038C CS038
NG040C CS040
NG042C CS042
NG044C CS044
NG048C CS048
NG050C CS050
NG054C CS054
NG060C CS060
NG068C CS068
NG076C CS076
NG092C CS092
NG110C CS110
1⁄2"
5⁄8"
3 ⁄4"
7⁄8"
1"
1-1⁄8"
1-1 ⁄4"
1-3⁄8"
1-1⁄2"
1-1⁄2"
1-5⁄8"
1-3 ⁄4"
1-7⁄8"
2"
2-1⁄8"
2-1 ⁄4"
2-3⁄8"
2-1⁄2"
2-5⁄8"
2-3 ⁄4"
3"
3-1⁄8"
3-1 ⁄4"
3-3 ⁄4"
4-1 ⁄4"
4-3 ⁄4"
5-3⁄4"
6-7⁄8"
1⁄4"
3⁄8"
1⁄2"
5⁄8"
3⁄4"
7⁄8"
1"
– 7⁄8"
– 1-1⁄8"
1⁄4" 1-1⁄2"
3⁄8" 2"
– 2-1⁄4"
1⁄2" 3"
1-1 ⁄4"
1-3⁄8"
1-1⁄2"
1-5⁄8"
1-3 ⁄4"
1-7⁄8"
1"
–
–
2" –
2-1⁄8" –
2-1 ⁄4" –
2-3⁄8" 2"
2-1⁄2" –
2-3 ⁄4" –
6-3 ⁄8"
6-3 ⁄4"
7-1⁄4"
7-1⁄2"
8"
8-3 ⁄4"
3 ⁄4"
3-1 ⁄4"
3-5 ⁄8"
3-7⁄8"
4"
4-1⁄2"
4-7⁄8"
1-1⁄8" –
1-3⁄16" –
1-1⁄4" 5-1⁄4"
5-1⁄2"
1-1⁄2" 6"
Lock-lip Edge Compression Ribs
2-7⁄8"
3"
3-1⁄2"
4"
4-1⁄2"
2-1⁄2" 9-1⁄4"
– 9-1⁄2"
3" 11"
3-1⁄2" 12-1⁄4"
4" 14"
1.62"
– 5" 15-1⁄2"
– 6" 18-1⁄2"
ZSi-Foster Engineering Catalog
– 145 –
41mm
* Gold Plated Steel Clamps Supplied with Fixed Stud and Nylon Lock Nut
* Stainless Steel Clamps Supplied with fixed Stud and Nylon Lock Nut from 1⁄2" through 1-3 ⁄4" Sizes and 1-7⁄8" through 6-7⁄8" Sizes are supplied with a Loose Bolt and Hex Nut
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware