Page 83 - ZSi-Foster-Engineering-Catalog
P. 83

 Channel Nut
with Top-Lock Spring
Use with W100, W150, W200, W210, W300, W400, W500, W800 and W900
Rapid Strut Slide Nut.
Use with W100, W150, W200, W210, W300, W400, W500, W800 and W900
Features and Benefits
• Ready-to-use pre-assembled for a quick installation, that retains assembly in place before final tightening
• Replaces channel nut and fitting with single piece
• Material: metal parts made of steel 1.0332; spring(s) made
of POM (polyoxymethylene), green
• Conforms to MFMA Metal Framing Standards (Metal Framing Manufacturers Association)
• Zinc plated
Channel Nuts
Standard Finish: Electro Galvanized (EG)
                                                                Part No.
  Size
   Thickness
  Wt. Lbs/C
  W2-0832TL
  #8 - 32
 1⁄4"(6mm)
  7.5 (3.4 Kg)
  W2-1032TL
  #10 - 32
  7.5 (3.4 Kg)
  W2-1024TL
 #10 - 24
  7.5 (3.4 Kg)
  W2-4TL
  1⁄4" - 20
   7.5 (3.4 Kg)
  W2-5TL
  5⁄16" - 18
 3⁄8"(10mm)
  9.7 (4.3 Kg)
  W2-6TL
 3⁄8" - 16
  10.0 (4.5 Kg)
  W2-8TL c
 1⁄2" - 13
 1⁄2"(13mm)
  11.5 (5.2 Kg)
  W5-8TL
  1⁄2" - 13
  3⁄8" (10mm)
   8.2 (3.7 Kg)
  c = Not for use with W400 or W500
     11⁄2"
39mm
13⁄8"
35mm
G
                                                                            s
                                        13⁄16"
20mm
  Part No.
  Size
   Thickness
  Wt. Lbs/C
  TLCSW1/4
 1⁄4" - 20
1⁄4"(6mm)
  7.5 (3.4 Kg)
  TLCSW3/8
  3⁄8" - 16
   7.5 (3.4 Kg)
  TLCSW1/2EG
  1⁄2" - 13
  3⁄8"(10mm)
  7.5 (3.4 Kg)
  ZSi-Foster Engineering Catalog
– 83 –
 WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
                 Technical Gamma Rooftop Concrete Beta Clamps Loop & Ring Spring Electrical Pipe & Conduit General Channel Nuts Channel Introduction Data Pads Supports Inserts & Z-Clamps Clamps Steel Fittings Supports Fittings & Hardware

























   81   82   83   84   85