Page 369 - ZSi-Foster Engineering Catalog - Electronic Version 2
P. 369

    ** Hose can be purchased by the reel or cut-to-length 50 feet or less.
Note: When used with Push-On fittings, hose clamps are not required.
1Trim the end of the hose as square as possible.
3 Completed connection, ensure that the hose is completely inserted.
Brand - Designates =Foster or =Breco Part
ZSi-Foster Engineering Catalog
“Push On” Hose
   Push-On Hose - Foster
• “Push-On” fittings do not require hose clamps. Hose grips barb through distortion of braid. Forms leak proof grip with “Push-On” fitting. “Push-On” hose used with standard barbed fittings requires hose clamp.
• For shop air, pneumatic tools, petroleum base hydraulic oils, anti-freeze compounds, gasoline, water, lubricating oils, and diesel fuels.
Foster “Push-On” hose is constructed with a synthetic rubber tube, fiber braid reinforcement and a synthetic rubber cover, resistant to abrasion, oil and mildew.
• Temperature range: -40° to +212°F.
   Part No.
1⁄4" x 9⁄16"
3⁄8" x 11⁄16"
1⁄2" x 13⁄16"
Fiber Braid Reinforced Synthetic Rubber
Fiber Braid Reinforced Synthetic Rubber
Fiber Braid Reinforced Synthetic Rubber
        2Grip the Plug or socket firmly and Push On hose.
  WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer, and which is known to cause birth defects or other reproductive harm. For more information go to
– 369 –
                       ITnedcehxnesical Data TechnicHaolsDeasta FHitotisnegs& Fittings Blow GuFnitstings & AcceMssisocriQesD BloSwtrGaiugnhst T&hAruccQeDssories HyHdyrdarualiucliQcDQD PneumatiicQD
Bulk Hose

   367   368   369   370   371