Page 3 - ZF Beta Hydraulic Clamps
P. 3

Beta Clamps - Standard
      Group
Part Tube Pipe Metric No. * Size Size Size
Bolt
  S1004 1⁄4" (0.250) – –
 S1
S1006 3 ⁄8"(0.375 ) – –
 SM1006 – – 6mm
1 ⁄4"-20 x 11 ⁄4"
  S2
S1007 – 1 ⁄8" (0.405 ) –
 SM1008 – – 8mm
 SM1012 – – 12mm
 S2008 1⁄2" (0.500 ) – –
 S2009 – 1 ⁄4" (0.540 ) –
 S2010 5 ⁄8" (0.625) – –
 S2011 – 3 ⁄8" (0.675) –
1 ⁄4"-20 x 13 ⁄8"
 S3
SM2014 – – 14mm
 SM2015 – – 15mm
 SM2018 – – 18mm
  S3012 3 ⁄4" (0.750) – –
 S3014 – 1 ⁄2" (0.840) –
 S3015 7⁄8" (0.875) – –
1 ⁄4"-20 x 11 ⁄2"
 S3016 1" (1.000) – –
 S4
SM3020 – – 20mm
 SM3025 – – 25mm
  S4017 – 3 ⁄4" (1.050) –
 S4018 11⁄8" (1.125) – –
1 ⁄4"-20 x 13 ⁄4"
 SM4030 – – 30mm
  S5020 11 ⁄4" (1.250) – –
 S5
S6
S5021 – 1" (1.315) –
 S5024 11⁄2" (1.500) – –
S5027 – 11 ⁄4" (1.660) –
S6030 – 11 ⁄2" (1.900) –
S7048 3" (3.000) – –
1 ⁄4"-20 x 21 ⁄2"
  SM5035 – – 35mm
  S6028 13 ⁄4" (1.750) – –
 1 ⁄4"-20 x 23 ⁄4"
 S6032 2" (2.000) – –
  S7038 – 2" (2.375) –
 S7036 21 ⁄4" (2.250) – –
 S7
S7040 21⁄2" (2.500) – –
S7044 23 ⁄4" (2.750) – –
1 ⁄4"-20 x 4"
      SUFFIX
* For additional sizes contact factory.
Note: Add assembly type to part number.
Example: S1004S-SS provides the complete assembly as shown with stainless steel components.
NOTE: SM (metric) only available in Steel with Polypropylene (green) cushion.
Components
   -SS Stainless Steel
Cushion
Polypropylene (green)
Example
    none Steel
S1004S
   -AL Steel
Aluminum
S1004S-AL
   Polypropylene (green)
S1004S-SS
        Steel w/ Polypropylene Cushion Steel w/ Aluminum Cushion
BETA STANDARD SERIES
• Cushions are Polypropylene (Green Color)
• Recommended for systems with less than 1,500 psi (103 bar)
without dynamic loads.
• Use for standard hydraulics, general pipe construction, electrical
cables, and general duty piping applications subject to moderate
levels of shock and vibration.
• Aluminum cushions and are used in higher heat
applications up to 500°F (260°C).
INSTALLATION - Refer to pages 9 – 11 for complete installation guide.
Assembly Types
                S
  C
B
  R
SI Z
     ORDERING EXAMPLE
 S1004-S
 ASSEMBLY INCLUDES
 Quantity
  Part No.
  Description
 1 Each
SWP1
Weld Plate
 1 Each
 SCP1
 Cover Plate
 2 Each
  SHB1
  Hex Bolts
 1 set
 S1004C
 Cushions
 (2) SHB-1 Hex Bolts SCP-1 Cover Plate
Cushions S1004-C
SWP-1 Weld Plate
           STANDARD SERIES COVER PLATE
  STANDARD SERIES SAFETY PLATE
  STANDARD SERIES WELD PLATE
  HEX BOLT
(Two required per assembly)
  STACKING BOLTS (Two required per assembly)
      SCP1 Thru SCP7
     SP1 Thru SP-6
     SWP1 Thru SWP7
     SHB1 Thru SHB7
     SB1 Thru SB6
  STANDARD SERIES CAP SCREW (Two required per assembly)
  C-RAIL NUT
(Two required per assembly)
  C-RAIL
  STRUT NUT
For Connection to Channel
  WESANCO CHANNEL
      SC-1 Thru SC-6
      SRN1-6
       SCR1 SCR2
      ZSA1-8
(Two required per assembly)
         W200 W210 W400 W500
   ZSi-Foster Engineering Catalog
– 3 –
   1   2   3   4   5